板框式压滤机在煤矿清挖水仓中的应用

煤矿每年雨季前都要清挖一次水仓淤泥,传统的人工清挖方式需要职工下到水仓底部,将底部沉淀物连同污水一并装入矿车,工作效率低,劳动强度大。利用板框式压滤机在矿井中直接将水仓污水中的煤泥压滤成饼状输送至地面,可节省人员,消除安全隐患,减少矿车运输,降低生产成本。     

多次动压影响巷道的围岩控制方法

针对厚煤层大采高工作面多次动压影响巷道围岩变形大的问题,结合成庄矿53082巷情况,分析了多次动压巷道围岩变形特征,提出锚杆索补强加固及浅部裂隙封堵和深部围岩加固的巷道加固方案,并进行井下试验。试验表明:巷道两帮最大移近量为376mm,顶底板最大移近量为502mm,巷道围岩变形控制效果较好,能够满足工作面安全生产使用要求。     

Surface modification of superfine SiC powders by ternary modifiers-KH560/sodium humate/SDS and its mechanism

SiC is a promising functional ceramic material with many great properties. High concentrated SiC slurry with excellent rheology and stability is required in some processes of ceramic forming. In this work, the dispersion of SiC powders was obviously improved by ternary modifiers: γ-(2,3-epoxypropoxy) propytrimethoxysilane (KH560), sodium humate and sodium dodecyl sulfate (SDS). Modified SiC slurry showed the lowest viscosity of 0.168 Pa s at a solid content of 50 vol%. The maximum absolute value of zeta potential of SiC increased from 47.3 to 61.6 mV by modification. Sedimentation experiments showed that a highly stable suspension of modified SiC was obtained at pH 10. SiC green body with high density of 2.643 g/cm³ was prepared with modified powders by slip casting. X-ray photoelectron spectra (XPS) and thermogravimetry (TG) measurements indicated the adsorption of modifiers on SiC surface. Therefore, modified SiC powders could stably disperse in aqueous media due to the increase of electrosteric repulsion between particles. The novel strategy used in this study could further improve the dispersion of SiC powders.     

Effects of methyl cellulose-based coating on physiochemical properties and chemical hazards of Chinese fried dough cake during storage

Coating has been used as a practical method to ensure the physiochemical properties and reduce the chemical hazard of fried foods. Methyl cellulose (MC) was used as a coating material to pretreat Chinese fried dough cake (CFDC) before frying. The results showed that the water content, hardness and L* value of the 1% MC coated sample were 31.67%, 848.54 g and 51.62, respectively, at the seventh day at 25 °C. Coating contents 1% MC could reduce the oil content, hardness, and extent of browning and improve the physiochemical properties of CFDC on 7 days of storage. Coating contents 1% MC also reduced the acid value, peroxide value, p-anisidine value, malondialdehyde content, 4-hydroxy-2-(E)-hexenal content, 4-hydroxy-2-(E)-nonenal content, acrylamide content and glycidyl ester content in CFDC on 7 days of storage. Our work contributes to the control of the oil content and chemical hazards for fried food during storage by applying an edible coating.     

Synthesis of a N-doped mesoporous carbon as an efficient electrocatalyst for oxygen reduction

A facile and effective approach was developed for the preparation of mesoporous Fe-NC by pyrolyzing the mixture of FeCl₂, urea, (NH₄)₂MoO₇, phthalic anhydride and SBA-15, during which the in-situ formation of iron phthalocyanine is confirmed. The obtained catalyst exhibits high catalytic activity towards ORR, whose half-wave potential can be 53 mV more positive than that of commercial Pt/C catalyst. Besides, the catalyst also exhibits high selectivity of four electron path, along with excellent stability and methanol tolerance in alkaline media. Based on the characterization results, we suggest, the higher surface areas, highly porous structures induced by SBA-15 addition, as well as high graphitic N content should be the proper origins for its outstanding catalytic performance.     

铝合金表面GPTMS硅烷膜的制备及耐蚀性能研究

为提高铝合金耐腐蚀力，运用正交试验法研究在铝合金表面制备 γ-（2，3-环氧丙氧）丙基三甲氧基硅烷（GPTMS）自组装膜最佳工艺条件，利用极化曲线和扫描电子显微镜研究该硅烷膜在铝合金表面的耐腐蚀性能。研究表明：最佳工艺条件为 100 mL溶液中， pH＝4. 5，V（GPTMS）∶V（EtOH）∶V（H₂O）= 2∶7∶91，T_{1（水解温度）}＝25 ℃，t_{1（水解时间）}＝7 h，t_{2（浸涂时间）}＝10 min，t_{3（固化时间）}＝90 min，T_{2（固化温度）}＝120 ℃，该工艺条件下制备的硅烷膜具有优异的耐腐蚀性能。     

Failure analysis of R-regions of CFRP hat-shaped structure under pull-off load

Journal of Mechanical Science and Technology - As a kind of typical structure, the hat-shaped structure (HSS) is widely used in carbon fiber reinforced plastics (CFRP) aircraft parts. In this work,...